How To Refinish A Bathtub

Clara Wei August 24, 2023 a , bathtub , how , refinish , to Comment

Introduction

Refinishing a bathtub is a great way to give your bathroom a fresh, new look without breaking the bank. It's a simple process that can be done in a weekend, and the end result is a shiny, smooth surface that looks and feels brand new. In this article, we'll go over the steps you need to take to refinish your bathtub and give it a new lease on life.

Gather Your Supplies

The first step in refinishing your bathtub is to gather all of the necessary supplies. You'll need:

A bathtub refinishing kit
A respirator mask
Safety glasses
Gloves
A paintbrush
Sandpaper
A cloth

Clean the Bathtub

Before you can start refinishing your bathtub, you need to make sure it's clean and free of any dirt, grime, or soap scum. Use a bathtub cleaner and a scrub brush to thoroughly clean the surface of the tub. Rinse the tub with water and dry it with a cloth.

Remove the Caulk

Next, you'll need to remove any caulk around the edges of the tub. Use a caulk remover tool to loosen the caulk, then use a putty knife to scrape it off. Make sure you remove all of the caulk before moving on to the next step.

Sand the Bathtub

Use sandpaper to rough up the surface of the bathtub. This will help the refinishing kit adhere better to the surface. Make sure you sand the entire surface of the tub, including the sides and the bottom.

Apply the Refinishing Kit

Now it's time to apply the refinishing kit. Follow the instructions on the kit carefully, as different kits may have different application methods. Generally, you'll need to mix the two-part epoxy together, then apply it to the surface of the tub with a paintbrush. Make sure you apply an even coat, and be careful not to leave any bubbles or streaks.

Let the Refinishing Kit Dry

Once you've applied the refinishing kit, you'll need to let it dry completely. This may take several hours, so be patient and don't use the bathtub until the kit is completely dry.

Apply a Second Coat (Optional)

If you want to ensure that your bathtub is as smooth and shiny as possible, you can apply a second coat of the refinishing kit. Follow the same application method as before, and let the second coat dry completely.

Re-Caulk the Edges

Once the refinishing kit is completely dry, you can re-caulk the edges of the tub. Use a caulking gun and a fresh tube of caulk to apply a new bead of caulk around the edges of the tub. Smooth it out with your finger or a caulk smoothing tool.

Conclusion

Refinishing a bathtub is a simple and affordable way to give your bathroom a fresh, new look. With the right supplies and a little bit of patience, you can have a shiny, smooth bathtub that looks and feels brand new. Follow the steps outlined in this article, and you'll be on your way to a beautifully refinished bathtub in no time.