How To Unclog A Bathtub Drain With A Snake

Clara Wei September 14, 2023 a , bathtub , drain , how , snake , to , unclog , with Comment

Bathtub Drain Stuck Down from bestworstmania.blogspot.com

Introduction

A clogged bathtub drain can be a frustrating problem. It can cause water to back up in the tub, making it difficult or impossible to take a shower or bath. One of the most effective ways to unclog a bathtub drain is by using a plumbing snake. A plumbing snake is a long, flexible tool that can reach deep into the drain to remove clogs. In this article, we will discuss how to unclog a bathtub drain with a snake.

What You Will Need

Before you begin, you will need a few tools:

A plumbing snake
A bucket
A pair of gloves
A flashlight
Plastic sheeting or old towels (optional)

Step-by-Step Instructions

Step 1: Remove any standing water

Before you start using the plumbing snake, it's important to remove any standing water from the bathtub. You can do this by using a bucket or a cup to scoop out the water. If the water is too deep, you may want to use plastic sheeting or old towels to absorb as much water as possible.

Step 2: Remove the drain cover

Next, you will need to remove the drain cover. This can usually be done by unscrewing the screws that hold it in place. If the screws are rusted or difficult to remove, you can use a flathead screwdriver to pry off the cover.

Step 3: Insert the plumbing snake

Once the drain cover is removed, you can insert the plumbing snake into the drain. Start by feeding the snake into the drain and turning the handle clockwise. As you turn the handle, the snake will begin to move down the drain. Keep turning the handle until you feel resistance.

Step 4: Break up the clog

When you feel resistance, you have likely reached the clog. Push and pull the snake in and out of the drain to break up the clog. You may feel the snake start to move more easily as the clog begins to break apart.

Step 5: Remove the snake and test the drain

Once you have broken up the clog, remove the snake from the drain. Use a flashlight to check for any remaining debris in the drain. Finally, run some water to test the drain and make sure the clog has been completely removed.

Conclusion

Using a plumbing snake is an effective way to unclog a bathtub drain. By following these simple steps, you can remove even stubborn clogs and enjoy a fully functional bathtub once again.